XZ1(S)-AL

XZ1(S)-AL

Halogen-free and fire-retardant aluminum cable. Cable for fixed installations in low voltage public distribution networks. Suitable for indoor, outdoor and buried installations.

Description

  • Construction standard: HD-603-5X.
  • Low Voltage Directive (LVD) compliant: 2014/35/UE
  • Construction Products Regulation (CPR) – (EU) Nº 305/2011: Reaction to fire Eca.
  • DoP number: E013-ENG-XZ1ALUMINIUM
  • Industrial use / Distribution network.
  • Cable suitable for indoor and outdoor installations, open air, buried or in conduits.

Technical characteristics

Conductor: Aluminium, class 2, based on UNE-EN 60228 and IEC 60228.
Insulation: Cross-linked Polyethylene (XLPE), type DIX 3 according UNE HD 603-1.
Outer sheath: Low Smoke Zero Halogen (LSZH) polyolefin DMO1 type according HD 603-1.
Nominal Voltage: 0,6/1 kV C.A.
Voltage Test: 3.500 V C.A. (5 minutes)
Maximum conductor temperatures: Normal operation 90°C. Short circuit (5sec) 250°C

Otras características

  • Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
  • Low halogen content according to EN 60754-2, EN 60754-1, IEC 60754-2, IEC 60754-1.
  • Low corrosive gas emission according to EN 60754-2, IEC 60754-2.
  • Low smoke emission according to EN 61034-2, IEC 61034-2.
  • Fire reaction (CPR) Eca.
  • High cold resistance -40°C (fixed and protected installations)
  • Water resistance AD5 (ITX5) according IEC 60529.
  • UV resistance according HD 605.
  • Impact resistance: AG2 Medium severity.
  • Minimum bending radius 15 x OD (during installation)

Secciones

Section Electric resistance 20°C (Ohm/km) Insulation thickness (mm) Outer sheath thickness (mm) Maximum overall diameter (mm) Weight (kg/m)
1×35 0,868 0,9 1,3 11,9 0,170
1×50 0,641 1 1,3 12,8 0,210
1×70 0,443 1,1 1,4 14,7 0,285
1×95 0,320 1,1 1,4 16,4 0,367
1×120 0,253 1,2 1,4 17,9 0,453
1×150 0,206 1,4 1,4 19,8 0,544
1×185 0,164 1,6 1,4 21,8 0,665
1×240 0,125 1,7 1,5 24,8 0,866
1×300 0,100 1,8 1,8 27,4 1,083
1×400 0,0778 2 1,9 31,5 1,385

 

*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.