RRF3Z1(AS)-AL

RRF3Z1(AS)-AL 3KV

Halogen-free, flame and fire retardant cables, low smoke emission and reduced opacity, armoured with corrugated tinned steel tape and used for the energy supply of 3kV single-phase and three-phase distribution lines used in control, command and signaling installations in railway infrastructures.

  • Construction Standard: ET-03.354.006.3 Ed.5, IEC-60502-1.
  • Construction Products Regulation (CPR) – (EU) Nº 305/2011:
  • Reaction to fire Dca-s2-d2-a2 red jacket with two brown longitudinal stripes.
  • DoP Number: D001-ENG-RRF3Z1ALUMINUM_3KV
  • RoHS compliant.
  • Power railway indoor infrastructures.

Conductor: Aluminium conductor (Class 2) according to UNE-EN 60288.
Insulation: Cross-linked Polyethylene (XLPE), type DIX 3 according UNE HD 603 and XLPE according IEC 60502.
Inner sheath: Cross-linked Polyethylene (XLPE), type DIX 3 according UNE HD 603 and XLPE according IEC 60502.
Armour: Corrugated tinned steel tape (F3)
Outer sheath: Thermoplastic polyolefin sheath ST8 according to IEC 60502-1
Nominal Voltage: 3/3 kV C.A
Voltage Test: 9.500 V C.A (5 minutes)
Minimum bending radius: 10 x overall diameter
Maximum conductor temperatures: Normal operation 90°C. Short circuit (5sec) 250°C

  • Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
  • Low halogen content according to EN 60754-2, EN 60754-1, IEC 60754-2, IEC 60754-1.
  • Low corrosive gas emission according to EN 60754-2, IEC 60754-2.
  • Low smoke emission according to EN 61034-2, IEC 61034-2.
  • Fire reaction (CPR) Dca-s2, d2, a2.
  • UV resistance (1 cycle) according to UNE 211605.
  • Water absorption resistance.
  • High cold resistance.
  • Impact and rodent resistance.
Section (mm2) Resistance at 20 °C

(Ohm/km)

Nominal outer diameter (mm) Weight (kg/m) CPR
2X35 0,868 33,6 0,969 Dca-s2-d2-a2
2X50 0,641 35 1,157 Dca-s2-d2-a2
2X70 0,443 38,2 1,407 Dca-s2-d2-a2
2X95 0,320 41,8 1,723 Dca-s2-d2-a2
2X120 0,253 44,6 2,002 Dca-s2-d2-a2
2X150 0,206 47,8 2,314 Dca-s2-d2-a2
3X35 0,868 35,4 1,192 Dca-s2-d2-a2
3X50 0,641 36,9 1,341 Dca-s2-d2-a2
3X70 0,443 40,5 1,660 Dca-s2-d2-a2
3X95 0,320 44,4 2,049 Dca-s2-d2-a2
3X120 0,253 47,4 2,395 Dca-s2-d2-a2
3X150 0,206 50,8 2,776 Dca-s2-d2-a2

 

*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.