Z1C4Z1-K(AS)

Z1C4Z1-K(AS)

Z1C4Z1-K(AS) is a screened LSZH safety cables. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment. For this reason, its use is highly recommended for public places and for all installations where it is necessary avoid to electric interference of nearby circuits. Thanks to THE copper braid screen with over 60% coverage, it provides high immunity to interference and optimum signal transmission quality, improving the life of the equipment.

  • Construction Standard: IEC 60502-1.
  • Low Voltage Directive (LVD) compliant: 2014/35/UE
  • Construction Products Regulation (CPR) – (EU) Nº 305/2011: Reaction to fire Cca-s1b, d1, a1
  • DoP Number: C022-ENG-Z1C4Z1K
  • RoHS compliant.
  • High electromagnetic protection against electrical interference of nearby circuits.

Conductor: Electrolytic copper, class 5 (flexible), according EN 60228 and IEC 60228.
Insulation: Low Smoke Zero Halogen (LSZH) polyolefin.
Screen: Copper braid with a coverage greater than 60%.
Outer sheath: Thermoplastic polyolefin sheath DMZ-E type according to UNE 21123 and ST8 according to IEC 60502-1.
Nominal Voltage: 0,6/1 kV C.A
Voltage Test: 3.500 V C.A.
Maximum conductor temperatures: Normal operation 70°C. Short circuit (5sec) 160°C

  • Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
  • Non-fire propagation according to EN 60332-3-24, IEC 60332-3-24.
  • Low halogen content according to EN 60754-2, EN 60754-1, IEC 60754-2, IEC 60754-1.
  • Low corrosive gas emission according to EN 60754-2, IEC 60754-2.
  • Low smoke emission according to EN 61034-2, IEC 61034-2.
  • Fire reaction (CPR) Cca-s1b, d1, a1.
  • UV resistance (1 cycle) according to UNE 211605.
  • Water absorption resistance.
  • High cold resistance.
  • Flexible cable.

Available on request

  • Hydrocarbons and oil resistance according to UIC-895 OR.
Section (mm2) Resistance at 20 °C

(Ohm/km)

Nominal outer diameter (mm) Weight (kg/m) CPR
2X1,5 13,3 10,8 0,146 Cca-s1b-d1-a1
3X1,5 13,3 11,3 0,172 Cca-s1b-d1-a1
4X1,5 13,3 12,1 0,202 Cca-s1b-d1-a1
5X1,5 13,3 13 0,239 Cca-s1b-d1-a1
7X1,5 13,3 13,9 0,287 Cca-s1b-d1-a1
10X1,5 13,3 17 0,391 Cca-s1b-d1-a1
12X1,5 13,3 17,5 0,439 Cca-s1b-d1-a1
14X1,5 13,3 18,3 0,492 Cca-s1b-d1-a1
16X1,5 13,3 19,2 0,551 Cca-s1b-d1-a1
19X1,5 13,3 20,1 0,662 Cca-s1b-d1-a1
24X1,5 13,3 23,2 0,766 Cca-s1b-d1-a1
2X2,5 7,98 11,8 0,177 Cca-s1b-d1-a1
3X2,5 7,98 12,4 0,218 Cca-s1b-d1-a1
4X2,5 7,98 13,3 0,259 Cca-s1b-d1-a1
5X2,5 7,98 14,3 0,311 Cca-s1b-d1-a1
7X2,5 7,98 15,4 0,381 Cca-s1b-d1-a1
10X2,5 7,98 19 0,523 Cca-s1b-d1-a1
12X2,5 7,98 19,6 0,594 Cca-s1b-d1-a1
14X2,5 7,98 20,5 0,669 Cca-s1b-d1-a1
16X2,5 7,98 21,6 0,754 Cca-s1b-d1-a1
19X2,5 7,98 22,6 0,856 Cca-s1b-d1-a1
24X2,5 7,98 26,2 1,061 Cca-s1b-d1-a1
2X4 4,95 13,6 0,235 Cca-s1b-d1-a1
3X4 4,95 14,3 0,293 Cca-s1b-d1-a1
4X4 4,95 15,4 0,358 Cca-s1b-d1-a1
5X4 4,95 16,8 0,436 Cca-s1b-d1-a1
2X6 3,3 14,8 0,289 Cca-s1b-d1-a1
3X6 3,3 15,6 0,368 Cca-s1b-d1-a1
4X6 3,3 16,9 0,453 Cca-s1b-d1-a1
5X6 3,3 18,4 0,556 Cca-s1b-d1-a1
2X10 1,91 16,6 0,391 Cca-s1b-d1-a1
3X10 1,91 17,5 0,511 Cca-s1b-d1-a1
4X10 1,91 19,1 0,639 Cca-s1b-d1-a1
5X10 1,91 20,8 0,791 Cca-s1b-d1-a1
2X16 1,21 18,8 0,523 Cca-s1b-d1-a1
3X16 1,21 20 0,697 Cca-s1b-d1-a1
4X16 1,21 21,8 0,881 Cca-s1b-d1-a1
5X16 1,21 23,8 1,099 Cca-s1b-d1-a1
2X25 0,78 22,4 0,741 Cca-s1b-d1-a1
3X25 0,78 23,8 1,025 Cca-s1b-d1-a1
4X25 0,78 26,1 1,282 Cca-s1b-d1-a1
5X25 0,78 28,8 1,624 Cca-s1b-d1-a1
2X35 0,554 24,6 0,945 Cca-s1b-d1-a1
3X35 0,554 26,1 1,301 Cca-s1b-d1-a1
4X35 0,554 28,9 1,685 Cca-s1b-d1-a1
5X35 0,554 32,4 2,182 Cca-s1b-d1-a1
2X50 0,386 28,4 1,296 Cca-s1b-d1-a1
3X50 0,386 30,6 1,845 Cca-s1b-d1-a1
4X50 0,386 33,9 2,391 Cca-s1b-d1-a1
2X70 0,272 32,4 1,785 Cca-s1b-d1-a1
3X70 0,272 34,7 2,508 Cca-s1b-d1-a1
4X70 0,272 38,4 3,257 Cca-s1b-d1-a1
2X95 0,206 36,2 2,278 Cca-s1b-d1-a1
3X95 0,206 38,7 3,221 Cca-s1b-d1-a1
4X95 0,206 43,5 4,274 Cca-s1b-d1-a1

 

*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.