REF3Z1-K(S) / REFA3Z1-K(S)

REF3Z1-K(S) / REFA3Z1-K(S)

Safety Cable (S), halogen-free, flame retardant, armoured with corrugated tinned steel tape, used for the power supply in railway facilities not susceptible to accumulation of smoke and toxic products in case of fire and that do not require special protection.

Description

  • Technical designation REF3Z1-K(S) for multipolar cables and REFA3Z1-K(S) for unipolar cab
  • Construction Standard: IEC 60502-1, UNE 21123-4, ET 03.354.019.6.
  • Low Voltage Directive (LVD) compliant: 2014/35/UE
  • Construction Products Regulation (CPR) – (EU) Nº 305/2011:
  • Reaction to fire Dca-s2-d2-a2 brown jacket.
  • DoP Number: D002-ENG-REF3Z1K
  • DoP Number: D004-ENG-REFA3Z1K
  • RoHS compliant.
  • Power railway indoor infrastructures.

Technical characteristics

Conductor: Flexible copper conductor (Class V) according to UNE-EN 60288 and IEC 60228. Circular sections ≤35mm2 and sectorial for upper sections (except unipolar cables).
Insulation: Cross-linked Polyethylene (XLPE), type DIX 3 according UNE 21123, UNE HD 603 and XLPE according IEC 60502.
Inner sheath: Polyethylene.
Armour: Corrugated tinned steel tape (F3 – multipolar) or aluminum (FA3 – unipolar).
Outer sheath: Thermoplastic polyolefin sheath DMZ2 type according to UNE-HD-620-1.
Nominal Voltage: 0,6/1 kV C.A
Voltage Test: 3.500 V C.A.
Maximum conductor temperatures: Normal operation 90°C. Short circuit (5sec) 250°C

Other characteristics

  • Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
  • Low halogen content according to EN 60754-2, EN 60754-1, IEC 60754-2, IEC 60754-1.
  • Low corrosive gas emission according to EN 60754-2, IEC 60754-2.
  • Low smoke emission according to EN 61034-2, IEC 61034-2.
  • Fire reaction (CPR) Dca-s2. d2, a2.
  • UV resistance (1 cycle) according to UNE 211605.
  • Water absorption resistance.
  • High cold resistance.
  • Impact and rodent resistance.
  • Flexible cable (F3).

Sections

Section (mm2) Resistance at 20 °C

(Ohm/km)

 Nominal outer diameter (mm) Weight (kg/m) CPR
1×16 1,21 15 0,282 Dca-s2-d2-a2
1×25 0,78 16,8 0,381 Dca-s2-d2-a2
1×35 0,554 17,9 0,478 Dca-s2-d2-a2
1×50 0,386 19,5 0,631 Dca-s2-d2-a2
1×70 0,272 21,4 0,841 Dca-s2-d2-a2
1×95 0,206 22,8 1,048 Dca-s2-d2-a2
1×120 0,161 25,1 1,292 Dca-s2-d2-a2
1×150 0,129 27,7 1,591 Dca-s2-d2-a2
1×185 0,106 30,3 1,931 Dca-s2-d2-a2
1×240 0,0801 32,8 2,473 Dca-s2-d2-a2
1×300 0,0641 35,7 3,061 Dca-s2-d2-a2
2×1,5 13,3 14,4 0,214 Dca-s2-d2-a2
2×2,5 7,98 15,4 0,249 Dca-s2-d2-a2
2×4 4,95 16,4 0,305 Dca-s2-d2-a2
2×6 3,3 17,6 0,361 Dca-s2-d2-a2
2×10 1,91 19,4 0,475 Dca-s2-d2-a2
2×16 1,21 21,6 0,632 Dca-s2-d2-a2
2×25 0,78 25,2 0,883 Dca-s2-d2-a2
2×35 0,554 27,4 1,121 Dca-s2-d2-a2
2×50 0,386 27 1,253 Dca-s2-d2-a2
2×70 0,272 30,4 1,763 Dca-s2-d2-a2
2×95 0,206 32,8 2,128 Dca-s2-d2-a2
2×120 0,161 36,8 2,700 Dca-s2-d2-a2
2×150 0,129 41,8 3,343 Dca-s2-d2-a2
2×185 0,106 46,2 4,038 Dca-s2-d2-a2
2×240 0,0801 50,3 5,150 Dca-s2-d2-a2
2×300 0,0641 55,2 6,376 Dca-s2-d2-a2
3×1,5 13,3 14,9 0,239 Dca-s2-d2-a2
3×2,5 7,98 15,9 0,284 Dca-s2-d2-a2
3×4 4,95 17 0,346 Dca-s2-d2-a2
3×6 3,3 18,3 0,425 Dca-s2-d2-a2
3×10 1,91 20,2 0,576 Dca-s2-d2-a2
3×16 1,21 22,6 0,773 Dca-s2-d2-a2
3×25 0,78 26,5 1,105 Dca-s2-d2-a2
3×35 0,554 29 1,429 Dca-s2-d2-a2
3×50 0,386 30,7 1,754 Dca-s2-d2-a2
3×70 0,272 34,9 2,433 Dca-s2-d2-a2
3×95 0,206 37,9 3,054 Dca-s2-d2-a2
3×120 0,161 43,1 3,923 Dca-s2-d2-a2
3×150 0,129 48,7 4,833 Dca-s2-d2-a2
3×185 0,106 54,1 5,868 Dca-s2-d2-a2
3×240 0,0801 59,3 7,253 Dca-s2-d2-a2
4×1,5 13,3 15,6 0,264 Dca-s2-d2-a2
4×2,5 7,98 16,8 0,326 Dca-s2-d2-a2
4×4 4,95 18 0,402 Dca-s2-d2-a2
4×6 3,3 19,5 0,495 Dca-s2-d2-a2
4×10 1,91 21,6 0,691 Dca-s2-d2-a2
4×16 1,21 24,3 0,947 Dca-s2-d2-a2
4×25 0,78 28,8 1,366 Dca-s2-d2-a2
4×35 0,554 31,7 1,787 Dca-s2-d2-a2
4×50 0,386 30,7 2,206 Dca-s2-d2-a2
4×70 0,272 34,9 3,066 Dca-s2-d2-a2
4×95 0,206 43,4 4,010 Dca-s2-d2-a2
4×120 0,161 49 5,120 Dca-s2-d2-a2
4×150 0,129 55,8 6,355 Dca-s2-d2-a2
5×1,5 13,3 16,5 0,304 Dca-s2-d2-a2
5×2,5 7,98 17,8 0,381 Dca-s2-d2-a2
5×4 4,95 19,2 0,467 Dca-s2-d2-a2
5×6 3,3 20,8 0,546 Dca-s2-d2-a2
5×10 1,91 23,2 0,836 Dca-s2-d2-a2
5×16 1,21 26,2 1,156 Dca-s2-d2-a2
5×25 0,78 31,4 1,705 Dca-s2-d2-a2
5×35 0,554 34,6 2,235 Dca-s2-d2-a2
5×50 0,386 39,1 3,052 Dca-s2-d2-a2
5×70 0,272 45,1 4,245 Dca-s2-d2-a2
5×95 0,206 49 5,366 Dca-s2-d2-a2
5×120 0,161 56,1 6,811 Dca-s2-d2-a2

 

*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.