RV-AL
Suitable cable for all types of underground networks for public power distribution, as well as low voltage connexions in industrial plants, urban networks, buildings, etc. Due to its rigidity, its use is recommended in installations with a simple configuration where a flexible cable is not needed. It can be installed outdoors, in ducts and even temporarily immersed in water.
- Construction Standard: IEC 60502-1, UNE 21123-2
- Low Voltage Directive (LVD) compliant: 2014/35/UE
- Construction Products Regulation (CPR) – (EU) Nº 305/2011: Reaction to fire Eca.
- DoP number: E015-ENG-RVALUMINIUM
- Industrial use / Distribution network.
- Cable suitable for indoor and outdoor installations, open air, buried or in conduits.
Conductor: Aluminium, class 2, based on UNE-EN 60228 and IEC 60228.
Insulation: Cross-linked Polyethylene (XLPE), type DIX 3 according UNE 21123, UNE HD 603 and XLPE according IEC 60502.
Outer sheath: PVC DMV-18 type according to UNE 21123-2 and ST2 type according to IEC 60502-1.
Nominal Voltage: 0,6/1 kV C.A.
Voltage Test: 3.500 V C.A. (5 minutes)
Maximum conductor temperatures: Normal operation 90°C. Short circuit (5sec) 250°C
- Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
- Fire reaction (CPR) Eca.
- High cold resistance -25°C (fixed and protected installations)
- Water resistance AD7 (ITX7) according IEC 60529.
- UV resistance (1 cycle) according to UNE 211605.
- Impact resistance: AG2 Medium severity.
Under request
- Rodent resistance.
| Section | Electric resistance 20°C (Ohm/km) | Insulation thickness (mm) | Outer sheath thickness (mm) | Maximum overall diameter (mm) | Weight (kg/m) |
| 1×35 | 0,868 | 0,9 | 1,4 | 12,1 | 0,191 |
| 1×50 | 0,641 | 1 | 1,4 | 13,7 | 0,246 |
| 1×70 | 0,443 | 1,1 | 1,4 | 14,7 | 0,302 |
| 1×95 | 0,320 | 1,1 | 1,5 | 16,5 | 0,402 |
| 1×120 | 0,253 | 1,2 | 1,5 | 18,1 | 0,484 |
| 1×150 | 0,206 | 1,4 | 1,6 | 20,1 | 0,587 |
| 1×185 | 0,164 | 1,6 | 1,6 | 22,2 | 0,718 |
| 1×240 | 0,125 | 1,7 | 1,7 | 24,7 | 0,916 |
| 1×300 | 0,100 | 1,8 | 1,8 | 27,4 | 1,125 |
| 1×400 | 0,0778 | 2 | 1,9 | 31,5 | 1,447 |
| 1×500 | 0,0605 | 2,2 | 2 | 37,2 | 1,912 |
*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.