RZ1(AS)-AL

RZ1(AS)-AL

Halogen-free and fire-retardant aluminum cable. Cable for fixed installations in low voltage public distribution networks. Suitable for indoor, outdoor and buried installations.

Description

  • Construction Standard: IEC 60502-1, UNE 21123-4
  • Low Voltage Directive (LVD) compliant: 2014/35/UE
  • Construction Products Regulation (CPR) – (EU) Nº 305/2011: Reaction to fire Eca.
  • DoP number: E014-ENG-RZ1ALUMINIUM
  • Industrial use / Distribution network.
  • Cable suitable for indoor and outdoor installations, open air, buried or in conduits.

Technical characteristics

Conductor: Aluminium, class 2, based on UNE-EN 60228 and IEC 60228.
Insulation: Cross-linked Polyethylene (XLPE), type DIX 3 according UNE 21123, UNE HD 603 and XLPE according IEC 60502.
Outer sheath: Thermoplastic polyolefin sheath DMZ-E type according to UNE 21123 and ST8 according to IEC 60502-1
Nominal Voltage: 0,6/1 kV C.A.
Voltage Test: 3.500 V C.A. (5 minutes)
Maximum conductor temperatures: Normal operation 90°C. Short circuit (5sec) 250°C

Other characteristics

  • Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
  • Non-fire propagation according to EN 60332-3-24, IEC 60332-3-24.
  • Low halogen content according to EN 60754-2, EN 60754-1, IEC 60754-2, IEC 60754-1.
  • Low corrosive gas emission according to EN 60754-2, IEC 60754-2.
  • Low smoke emission according to EN 61034-2, IEC 61034-2.
  • Fire reaction (CPR) Eca.
  • High cold resistance -40°C (fixed and protected installations)
  • Water resistance AD5 (ITX5) according IEC 60529.
  • UV resistance (1 cycle) according to UNE 211605.
  • Impact resistance: AG2 Medium severity.

Under request

  • Rodent resistance.

Product range

Section Electric resistance 20°C (Ohm/km) Insulation thickness (mm) Outer sheath thickness (mm) Maximum overall diameter (mm) Weight (kg/m)
1×35 0,868 0,9 1,4 12,1 0,192
1×50 0,641 1 1,4 13,7 0,232
1×70 0,443 1,1 1,4 14,7 0,304
1×95 0,320 1,1 1,5 16,5 0,400
1×120 0,253 1,2 1,5 18,1 0,485
1×150 0,206 1,4 1,6 20,1 0,589
1×185 0,164 1,6 1,6 22,2 0,720
1×240 0,125 1,7 1,7 24,7 0,916
1×300 0,100 1,8 1,8 27,4 1,128
1×400 0,0778 2 1,9 31,5 1,451
1×500 0,0605 2,2 2 37,2 1,917

 

*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.