
Z1HOZ1-K(AS)
Z1HOZ1-K(AS) is a flexible screened cable for signaling and control on industrial machinery facilities. The overall and individual screen make them especially suitable for areas where electrical noise protection is required, its use is highly recommended for public places and for all installations where it is necessary avoid to electric interference of nearby circuits.
- Construction Standard: UNE -EN-50288-7, IEC-60288.
- Low Voltage Directive (LVD) compliant: 2014/35/UE
- Construction Products Regulation (CPR) – (EU) Nº 305/2011: Reaction to fire Cca-s1b, d1, a1.
- DoP number: C027-ENG-Z1HOZ1K
- RoHS compliant.
- High electromagnetic protection providing high immunity against interference.
Conductor: Flexible electrolytic copper conductor (class V) according to UNE-EN 60288
Insulation: Thermoplastic polyolefin according EN 50288-7
Screen (individual/overall): Individual polyester composed by on aluminum / polyester tape with 100% coverage + tinned copper drain wire.
Sheath: Thermoplastic polyolefin according EN 50288-7
Nominal voltage: 300/500 V
Test voltage: 1.500 V.ac
Maximum conductor temperatures: Normal operation 70°C Short circuit. Short circuit (5sec) 160°C
- Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
- Non-fire propagation according to EN 60332-3-24, IEC 60332-3-24.
- Low halogen content according to EN 60754-2, EN 60754-1, IEC 60754-2, IEC 60754-1.
- Low corrosive gas emission according to EN 60754-2, IEC 60754-2.
- Low smoke emission according to EN 61034-2, IEC 61034-2.
- Fire reaction (CPR) Cca-s1b, d1, a1.
- UV resistance (1 cycle) according to UNE 211605.
- Water absorption resistance.
- High cold resistance.
- Electromagnetic protection.
Available on request
- Hydrocarbons and oil resistance according to UIC-895 OR.
- UV resistance (> 10 cycles) according to UNE 211605.
| Section | Resistance at 20 °C
(Ohm/km) |
External diameter (mm) | Weight (kg/m) | CPR |
| 2x2x0,5 | 36 | 9,8 | 0,124 | Cca-s1b-d1-a1 |
| 3x2x0,5 | 36 | 10,3 | 0,136 | Cca-s1b-d1-a1 |
| 4x2x0,5 | 36 | 11,2 | 0,175 | Cca-s1b-d1-a1 |
| 5x2x0,5 | 36 | 12,4 | 0,211 | Cca-s1b-d1-a1 |
| 6x2x0,5 | 36 | 13,5 | 0,242 | Cca-s1b-d1-a1 |
| 10x2x0,5 | 36 | 16,3 | 0,363 | Cca-s1b-d1-a1 |
| 12x2x0,5 | 36 | 18,1 | 0,425 | Cca-s1b-d1-a1 |
| 16x2x0,5 | 36 | 20,6 | 0,546 | Cca-s1b-d1-a1 |
| 19x2x0,5 | 36 | 22,2 | 0,627 | Cca-s1b-d1-a1 |
| 24x2x0,5 | 36 | 24,7 | 0,777 | Cca-s1b-d1-a1 |
| 2x3x0,5 | 36 | 10,5 | 0,143 | Cca-s1b-d1-a1 |
| 3x3x0,5 | 36 | 11,2 | 0,175 | Cca-s1b-d1-a1 |
| 6x3x0,5 | 36 | 15,2 | 0,302 | Cca-s1b-d1-a1 |
| 12x3x0,5 | 36 | 20,4 | 0,546 | Cca-s1b-d1-a1 |
| 2x2x1 | 19,5 | 10,5 | 0,153 | Cca-s1b-d1-a1 |
| 3x2x1 | 19,5 | 11,9 | 0,182 | Cca-s1b-d1-a1 |
| 4x2x1 | 19,5 | 12,4 | 0,222 | Cca-s1b-d1-a1 |
| 5x2x1 | 19,5 | 14,3 | 0,286 | Cca-s1b-d1-a1 |
| 6x2x1 | 19,5 | 15,1 | 0,325 | Cca-s1b-d1-a1 |
| 10x2x1 | 19,5 | 18,9 | 0,503 | Cca-s1b-d1-a1 |
| Section | Resistance at 20 °C
(Ohm/km) |
External diameter (mm) | Weight (kg/m) | CPR |
| 12x2x1 | 19,5 | 21 | 0,589 | Cca-s1b-d1-a1 |
| 16x2x1 | 19,5 | 24,2 | 0,775 | Cca-s1b-d1-a1 |
| 19x2x1 | 19,5 | 26,1 | 0,892 | Cca-s1b-d1-a1 |
| 24x2x1 | 19,5 | 29,0 | 1,101 | Cca-s1b-d1-a1 |
| 2x3x1 | 19,5 | 12,1 | 0,192 | Cca-s1b-d1-a1 |
| 3x3x1 | 19,5 | 13,0 | 0,247 | Cca-s1b-d1-a1 |
| 6x3x1 | 19,5 | 17,4 | 0,438 | Cca-s1b-d1-a1 |
| 12x3x1 | 19,5 | 23,9 | 0,792 | Cca-s1b-d1-a1 |
| 2x2x1,5 | 13,3 | 12,0 | 0,196 | Cca-s1b-d1-a1 |
| 3x2x1,5 | 13,3 | 12,7 | 0,212 | Cca-s1b-d1-a1 |
| 4x2x1,5 | 13,3 | 13,5 | 0,275 | Cca-s1b-d1-a1 |
| 5x2x1,5 | 13,3 | 15,2 | 0,338 | Cca-s1b-d1-a1 |
| 6x2x1,5 | 13,3 | 16,7 | 0,401 | Cca-s1b-d1-a1 |
| 10x2x1,5 | 13,3 | 20,4 | 0,609 | Cca-s1b-d1-a1 |
| 12x2x1,5 | 13,3 | 22,9 | 0,732 | Cca-s1b-d1-a1 |
| 16x2x1,5 | 13,3 | 25,9 | 0,922 | Cca-s1b-d1-a1 |
| 19x2x1,5 | 13,3 | 28,1 | 1,084 | Cca-s1b-d1-a1 |
| 24x2x1,5 | 13,3 | 31,3 | 1,361 | Cca-s1b-d1-a1 |
| 2x3x1,5 | 13,3 | 13,0 | 0,232 | Cca-s1b-d1-a1 |
| 3x3x1,5 | 13,3 | 13,8 | 0,293 | Cca-s1b-d1-a1 |
| 6x3x1,5 | 13,3 | 19,3 | 0,533 | Cca-s1b-d1-a1 |
| 12x3x1,5 | 13,3 | 25,5 | 0,964 | Cca-s1b-d1-a1 |
*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.

