Z1Z1MZ1(AS)
HFFR and armour cables Z1Z1MZ1(AS) are highly recommended in hazardous areas with explosive gas atmospheres (ATEX) or with risk of fire (Petrochemical plants, gas stations, flammable product stores, etc.) and in general, where the cable is subject to risk of mechanical aggression.
- Construction Standard: IEC 60502-1, UNE 21123-4
- Low Voltage Directive (LVD) compliant: 2014/35/UE
- Construction Products Regulation (CPR) – (EU) Nº 305/2011: Reaction to fire Cca-s1b, d1, a1.
- DoP Number: C012-ENG- Z1Z1MZ1
- RoHS compliant.
- Suitable for Industrial use / Potentially explosion hazard locations (ATEX area).
Conductor: Rigid electrolytic copper conductor (Class II) according to UNE-EN 60288 and IEC 60228
Insulation: Low Smoke Zero Halogen (LSZH) polyolefin.
Inner sheath: Poliolefina termoplástica tipo DMZ-E según Norma UNE 21123-4 y tipo ST8 según IEC 60502-1.
Armour: Crown galvanized steel wire according to IEC 60502-1 and UNE 21123-4
Outer sheath: Thermoplastic polyolefin sheath DMZ-E type according to UNE 21123 and ST8 according to IEC 60502-1
Nominal Voltage: 0,6/1 kV C.A
Voltage Test: 3.500 V C.A.
Maximum conductor temperatures: Normal operation 70°C. Short circuit (5sec) 160°C
- Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
- Non-fire propagation according to EN 60332-3-24, IEC 60332-3-24.
- Low halogen content according to EN 60754-2, EN 60754-1, IEC 60754-2, IEC 60754-1.
- Low corrosive gas emission according to EN 60754-2, IEC 60754-2.
- Low smoke emission according to EN 61034-2, IEC 61034-2.
- Fire reaction (CPR) Cca-s1b, d1, a1.
- UV resistance (1 cycle) according to UNE 211605.
- Water absorption resistance.
- High cold resistance.
- Impact and rodent resistance.
Available on request
- Hydrocarbons and oil resistance according to UIC-895 OR.
| Section (mm2) | Resistance at 20 °C
(Ohm/km) |
Nominal outer diameter (mm) | Weight (kg/m) | CPR |
| 2X1,5 | 12,1 | 13,5 | 0,35 | Cca-s1b-d1-a1 |
| 4X1,5 | 12,1 | 15,1 | 0,44 | Cca-s1b-d1-a1 |
| 7X1,5 | 12,1 | 19,0 | 0,83 | Cca-s1b-d1-a1 |
| 12X1,5 | 12,1 | 22,6 | 1,10 | Cca-s1b-d1-a1 |
| 24X1,5 | 12,1 | 28,3 | 1,65 | Cca-s1b-d1-a1 |
| 2X2,5 | 7,41 | 14,4 | 0,41 | Cca-s1b-d1-a1 |
| 12X2,5 | 7,41 | 24,7 | 1,33 | Cca-s1b-d1-a1 |
| 24X2,5 | 7,41 | 31,7 | 2,08 | Cca-s1b-d1-a1 |
*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.