1Z1C7Z1-K(AS)

1Z1C7Z1-K(AS)

1Z1C7Z1-K(AS) are screened LSZH safety cables. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment. For this reason, its use is highly recommended for public places and for all installations where it is necessary avoid to electric interference of nearby circuits. Thanks to copper screen with over 100% coverage, it provides high immunity to interference and optimum signal transmission quality, improving the life of the equipment.

Description

  • Construction Standard: GE NNC007, IEC 60502-1.
  • Low Voltage Directive (LVD) compliant: 2014/35/UE
  • Construction Products Regulation (CPR) – (EU) Nº 305/2011: Reaction to fire Cca-s1b, d1, a1
  • DoP Number: C025-ENG-1Z1C7Z1K
  • RoHS compliant.
  • High electromagnetic protection against electrical interference of nearby circuits.

Technical characteristics

Conductor: Electrolytic copper, class 5 (flexible), according EN 60228 and IEC 60228.
Insulation: Thermoplastic polyolefin.
Screen: Copper strip (coverage 100%)
Outer sheath: Thermoplastic polyolefin sheath DMZ-E type according to UNE 21123 and ST8 according to IEC 60502-1.
Nominal Voltage: 0,6/1 kV C.A
Voltage Test: 3.500 V C.A.
Maximum conductor temperatures: Normal operation 70°C. Short circuit (5sec) 160°C

Other characteristics

  • Non-flame propagation according to EN 60332-1-2, IEC 60332-1-2.
  • Non-fire propagation according to EN 60332-3-24, IEC 60332-3-24.
  • Low halogen content according to EN 60754-2, EN 60754-1, IEC 60754-2, IEC 60754-1.
  • Low corrosive gas emission according to EN 60754-2, IEC 60754-2.
  • Low smoke emission according to EN 61034-2, IEC 61034-2.
  • Fire reaction (CPR) Cca-s1b, d1, a1.
  • UV resistance (1 cycle) according to UNE 211605.
  • Water absorption resistance.
  • High cold resistance.

Available on request

  • Hydrocarbons and oil resistance according to UIC-895 OR.

Dimensions

Section (mm2) Resistance at 20 °C

(Ohm/km)

 Nominal outer diameter (mm) Weight (kg/m) CPR
1X70 0,272 19,4 0,951 Cca-s1b-d1-a1
1X95 0,206 21,2 1,190 Cca-s1b-d1-a1
2X1 19,5 12,6 0,232 Cca-s1b-d1-a1
2×2,5 7,98 14 0,301 Cca-s1b-d1-a1
2×4 4,95 15 0,357 Cca-s1b-d1-a1
2×6 3,3 16,2 0,431 Cca-s1b-d1-a1
2×10 1,91 18 0,567 Cca-s1b-d1-a1
2×16 1,21 20,2 0,746 Cca-s1b-d1-a1
2X25 0,78 23,8 1,054 Cca-s1b-d1-a1
4×2,5 7,98 15,6 0,391 Cca-s1b-d1-a1
4×4 4,95 16,9 0,478 Cca-s1b-d1-a1
4×6 3,3 18,3 0,592 Cca-s1b-d1-a1
4×10 1,91 20,5 0,808 Cca-s1b-d1-a1
4×16 1,21 23,8 1,094 Cca-s1b-d1-a1
4X35 0,78 30,3 2,031 Cca-s1b-d1-a1
6×1 19,5 15,9 0,382 Cca-s1b-d1-a1
6X1,5 13,3 16,5 0,409 Cca-s1b-d1-a1
6×2,5 7,98 18 0,531 Cca-s1b-d1-a1
6×4 4,95 19,5 0,659 Cca-s1b-d1-a1
6×6 3,3 21,3 0,828 Cca-s1b-d1-a1
7X1 19,5 15,9 0,385 Cca-s1b-d1-a1
7X1,5 13,3 16,5 0,429 Cca-s1b-d1-a1
7X2,5 7,98 18 0,541 Cca-s1b-d1-a1
7X4 4,95 19,5 0,677 Cca-s1b-d1-a1
7X6 3,3 21,3 0,857 Cca-s1b-d1-a1
8X1 19,5 16,9 0,434 Cca-s1b-d1-a1
8X1,5 13,3 17,6 0,485 Cca-s1b-d1-a1
8X2,5 7,98 19,2 0,615 Cca-s1b-d1-a1
8X4 4,95 20,9 0,772 Cca-s1b-d1-a1
8X6 3,3 22,9 0,981 Cca-s1b-d1-a1
10×2,5 7,98 22 0,728 Cca-s1b-d1-a1
10×4 4,95 24 0,918 Cca-s1b-d1-a1
14×1 19,5 20,5 0,616 Cca-s1b-d1-a1
14X1,5 13,3 21,4 0,699 Cca-s1b-d1-a1
14×2,5 7,98 23,7 0,905 Cca-s1b-d1-a1
16X1 19,5 21,5 0,681 Cca-s1b-d1-a1
16X1,5 13,3 22,5 0,775 Cca-s1b-d1-a1
16X2,5 7,98 24,8 1,009 Cca-s1b-d1-a1
19X1 19,5 22,5 0,753 Cca-s1b-d1-a1
19X2,5 13,3 26 1,129 Cca-s1b-d1-a1
24×1 19,5 25,8 0,921 Cca-s1b-d1-a1
24X1,5 13,3 27 1,056 Cca-s1b-d1-a1
24×2,5 7,98 30,2 1,408 Cca-s1b-d1-a1
30X1 19,5 27,1 1,067 Cca-s1b-d1-a1
30X1,5 13,3 28,6 1,244 Cca-s1b-d1-a1
30X2,5 7,98 32,4 1,703 Cca-s1b-d1-a1
37×1 19,5 29,3 1,258 Cca-s1b-d1-a1
37X1,5 13,3 31,3 1,503 Cca-s1b-d1-a1
37×2,5 7,98 35 2,020 Cca-s1b-d1-a1

 

*The values of the outer diameters are approximate, always within production tolerance. For more information, please contact us.